Selecting traces |
Each trace ID is shown in the same color as its associated trace in the plot area. The trace IDs associated with the disabled (non-visible) traces are shown in an italic normal weight font and the enabled trace IDs are shown in a bold upright font.
You can control which traces are displayed as follows:
- When you left click on one of the trace IDs in the trace selection box, the associated trace is toggled on or off.
- To view a single trace all by itself, right click on the trace ID of interest. That trace will be enabled and all the others will be disabled.
- Double click on any of the trace IDs to enable all traces at once.